Flow-type magnetic separator MF 50/1-UP-P6-N-6-80-S-P

This separator not suit you?
We will make a custom separator for you
Contact us

Customer support

+420 577 220 497
e-shop@magsy.co.uk

Make an inquiry

Data sheet

Material Stainless steel DIN 1.4301, EN 10088, ČSN 17240, AISI 304, AKV 7 - non-stabilized austenitic nickel-chromium steel (X5CrNi 18-10)
Number of magnetic bars 3
Total weight 18 kg
Magnet temperature resistance 80 °C
Input/Output 50 mm
Body surface finish Glass bead blasting
Sealing Silicone (-58 °F to 302 °F)
Piping connection 2x flat welded flange; ČSN EN 1092-1 type 01 DN 50 PN6; material: 1.4301
Number of casings Single casing
A number of magnetic rods, detail 3 (3 x dia. 30 mm)
Tearing force 106 N
Maximum pressure PS 6 bar
Maximum temperature TS 80 °C
Magnetic component weight 9.8 kg
Magnetic force 12.200 Gs
Product state New
Design UP
Magnet type Neodymium (NdFeB)
Replaceable tubes ANO
Suitable for food industry YES
52098
8595134012637
€1,980.00 Tax excluded

Doprava nad 1000 Kč ZDARMA

Additional description

The equipment is designed to separate metallic impurities from media that are not hazardous per Article 13 of Directive 2014/68/EU (PED) - Media group 2. These magnetic flow separators do not fall under any category of pressure equipment per 2014/68/EU (Article 4, para. 3). For more information, visit: www.magneticke-separatory.cz (opens in a new window)

For more information, visit:  www.magnetic-separators.info (opens in a new window)

 TEST METHOD

Magnetic Induction Measurement Procedure

The measurement is performed using a standard gauss meter at the point with the highest design magnetic induction - in the position of the pole pieces, or in the lowest point of the magnetic circuit. The test is repeated 3 times in different locations of the magnetic circuit; then the average magnetic induction is calculated.

Tearing force measurement procedure

This force is measured using a polished steel measurement standard with a diameter of 10 mm and a height of 20 mm. The measurement is performed at the point with the highest design magnetic induction - in the position of the pole pieces, or in the lowest point of the magnetic circuit. The force at which the standard is separated is recorded. The test is repeated 3 times and then the average tearing force is calculated.

For your information, this value is 10 N = approx. 1 kg.

The resulting tearing force depends on a range of factors, e.g. on the dimensions of the measurement standard, the air gap between the standard and the tested magnetic circuit, the measurement standard's surface finish, etc.

16 other products in the same category: