Flow-type magnetic separator MF 100/1-70-EKO-N-4-80-S-P

This separator not suit you?
We will make a custom separator for you
Contact us

Customer support

+420 577 220 497
e-shop@magsy.co.uk

Make an inquiry

Data sheet

Material Stainless steel DIN 1.4301, EN 10088, (X5CrNi 18-10), ČSN 17240, AISI 304, AKV 7
Total weight 12 kg
Magnetic core weight 8,7 kg
Magnet temperature resistance 80 °C (176°F) – maximum working temperature
Input/Output 66 mm
Body surface finish Glass bead blasting
Surface finish of grates and tubes Polishing, Ra value less than: 0.1 µm
Sealing Silicone - also for the food industry (ATTEST)
Number of casings Single casing
Cleaning method Manual
Maximum pressure: 6 bar
Design ECO
Number of tubes 4
Magnetic core induction 14.500 Gs
Magnetic casing induction 10.200 Gs
Shear force at the core 118 N
Casing tearing force 93 N
Connection Hladká trubka ø 70 x 2 mm (2 3 ⁄4 x 0 5 ⁄64 in); materiál: 1.4301
52483
8595134063332
€2,169.20 Tax excluded

Doprava nad 1000 Kč ZDARMA

Additional description

The equipment is designed to separate metallic impurities from media that are not hazardous per Article 13 of Directive 2014/68/EU (PED) - Media group 2. These magnetic flow separators do not fall under any category of pressure equipment per 2014/68/EU (Article 4, para. 3). For more information, visit: www.magneticke-separatory.cz (opens in a new window)

For more information, visit:  www.magnetic-separators.info (opens in a new window)

 TEST METHOD

Magnetic Induction Measurement Procedure

The measurement is performed using a standard gauss meter at the point with the highest design magnetic induction - in the position of the pole pieces, or in the lowest point of the magnetic circuit. The test is repeated 3 times in different locations of the magnetic circuit; then the average magnetic induction is calculated.

Tearing force measurement procedure

This force is measured using a polished steel measurement standard with a diameter of 10 mm and a height of 20 mm. The measurement is performed at the point with the highest design magnetic induction - in the position of the pole pieces, or in the lowest point of the magnetic circuit. The force at which the standard is separated is recorded. The test is repeated 3 times and then the average tearing force is calculated.

For your information, this value is 10 N = approx. 1 kg.

The resulting tearing force depends on a range of factors, e.g. on the dimensions of the measurement standard, the air gap between the standard and the tested magnetic circuit, the measurement standard's surface finish, etc.

9 other products in the same category: